DATEC - KNX / DALI actuator 1x 8 channels

Description

The DALI Gateway is a device for controlling and monitoring up to 8 DALI ballast.

With its KNX input which is transformed into a DALI signal it is not necessary to have complex electrical installations, and due to its decentralized housing it can be installed near the lighting equipment (suspend ceilings) to avoid additional costs of wiring.

Each lamp may also be controlled manually using the buttons on the device. Part of the monitoring is directly visible on the device itself. This is useful for commissioning lamps and test the installation even without KNX Programming. KNX bus Power is sufficient for this purpose.

Functional description

•          DALI Gateway for 8 independent DALI channels.
•          DALI supply included in the gateway, powered by the KNX bus: No need of external DALI power supply, no need of powering KNX/DALI Actuator with supply voltage.
•          1 KNX input / 1 DALI line output.
•          KNX and DALI are isolated with 4kV.
•          Each lamp can be set up, controlled and monitored independently
•          Each lamp can be tested in handmode by buttons on gateway
•          Lamps can be addressed physically or randomly
•          Lamp addressing can be done manually by buttons on gateway, or by KNX telegrams
•          LEDs for status indication of each lamp
•          Operating temperature -5°C … +45°C
•          Housing: 139 x 45 x 19mm (including connectors)